11. EXPLANATION OF COMPONENTS 11.1.5 E: SWITCHES | | (OOOO ws fi @ 1. O G/O oO F/O L/O B/O O O O ( C H.O. (heavy-duty operation mode) lights up: This is used for heavy-duty work. G.O. (general operation model lights up: This is used for ordinary work. F.O. (finishing operation mode) lights up: This is used for levelling or grading work. L.O. (lifting operation mode) lights up: This is used for fine control operations. B.O. (breaker operation mode) lights up: This is used for breaker work. H/O » ble to carry out operations more easily. ; WORKING MODE SELECTOR SWITCH (Basic switch) This switch is used to set the movement or power for the work equipment.
By selecting the mode to match the working conditions, it is possi- When starting the engine, G.O. (general operation) mode is automatically selected. Each time the switch is pressed, the mode selection changes. NOTICE When the breaker is used, never select the H.O. (heavy-duty REMARK H switch is also used for setting “hours” in the clock and M switch for setting “minutes”. See 11.1.4-5 “DISPLAY”. PC160/180/200-6k-ENG operation) mode.