Connecting Rods and Pistons/Pistons and Connecting Rods 16. Connect fuel pump impulse line (B) and fasten with hose clamp (A). M36290 -UN-29JAN90 M98,2030K,45 -19-10OCT85 19. Install left side shroud (D), oil fill tube bracket (C), lift bracket (B), and fasten with six cap screws. Tighten lift bracket cap screw to 11 ± 3 N·m (97 ± 27 lb-in.). 20. Connect spark plug wire (A). 21. Install engine. (See machine technical manual.) M36472 -UN-29JAN90 A—Spark Plug Wire B—Lift Bracket C—Oil Fill Tube Bracket D—Left Side Shroud CTM2 (19APR90) 30-27 16, 18, 20 & 24HP Onan Engines M98,2030K,47 -19-10OCT85 AllTractorManuals.com 130495 17.
Install right side shroud (E), lift bracket (D), and fasten with five cap screws (C). Tighten lift bracket cap screw to 11 ± 3 N·m (97 ± 27 lb-in.). 18. Connect spark plug wire (A) and voltage regulator leads (B). Install the two stator leads on “AC” terminals and the battery lead on “B+” terminal of the voltage regulator. A—Spark Plug Wire B—Voltage Regulator Leads C—Cap Screw (5 used) D—Lift Bracket E—Right Side Shroud -UN-29JAN90 M36289 M98,2030K,46 -19-10OCT85 30 27