Lubrication System/Oil Pressure Regulating Valve 10. Apply pipe sealant on cap screw (A) threads. 11. Install clip (B), four cap screws, and nut. Tighten cap screws and nut to 12 ± 1 N·m (106 ± 9 lb-in.). 12. Install stator wiring (C) in clip. M36432 -UN-29JAN90 M98,2040K,21 -19-11OCT85 REMOVE OIL PRESSURE REGULATING VALVE 1. Park tractor safely. 2. Disconnect negative (-) battery cable. M36217 -UN-22NOV89 NOTE: For T260 engine, go to Step 8. 3. Remove wing nut to remove air cleaner cover. M98,2040K,23 -19-11OCT85 CTM2 (19APR90) 40-10 16, 18, 20 & 24HP Onan Engines AllTractorManuals.com 130495 13. Install clip (A) on governor arm (B).
Push governor rod (C) and governor arm toward carburetor until they bottom out. 14. Install governor rod in closest governor arm hole. If governor rod is between two holes, install governor rod -UN-29JAN90 in next hole toward flywheel. Push clip on governor rod. 15. Install flywheel. (See Group 20 in this manual.) 16. Install engine. (See machine technical manual.) M36433 M98,2040K,22 -19-11OCT85 40 10