Carburetor/Carburetor 9. If engine is in machine, connect and fasten fuel line to carburetor with clamp (A). NOTE: Adjust choke properly for satisfactory engine starting and operation. The following adjustment can only be made with engine installed in machine. M36994 -UN-25JAN90 10. Install choke cable in bracket and fasten with screw (B). 11. Push choke control knob (on instrument panel) in all the way. 12. Hold choke valve (C) straight up and tighten screw (D). 13. Pull choke control knob out. Choke valve must be closed. Push knob in. Valve must be completely open. Adjust if needed. 14. Check that choke and throttle linkages operate freely. 15. Install air cleaner assembly.
(See Install Air Cleaner in Group 05 of this manual.) 16. Adjust engine speed. (See machine technical manual.) M98,2050K,48 -19-26NOV85 50 20 CTM2 (19APR90) 50-20 16, 18, 20 & 24HP Onan Engines AllTractorManuals.com 130495