Stator and Rectifier—Regulator/Stator IMPORTANT: Do not pry on flywheel with a screwdriver. Ceramic magnets and gear case cover can be damaged. 11. Loosen flywheel using a puller. 12. Remove puller, cap screw, washer, and flywheel. M36293 -UN-29JAN90 M98,2055K,4 -19-22OCT85 13. Disconnect stator lead from retaining clip (A). 14. Remove three cap screws. Gently pull stator off mounting posts. M37155 -UN-25JAN90 M98,2055K,5 -19-22OCT85 CTM2 (19APR90) 55-3 16, 18, 20 & 24HP Onan Engines AllTractorManuals.com 130495 INSTALL STATOR 1. Put stator on mounting posts and fasten with three cap screws. Tighten cap screws evenly so that stator is held flat against posts.
-UN-25JAN90 Connect stator lead in retaining clip (A). M37155 M98,2055K,6 -19-22OCT85 55 3