Stator and Rectifier—Regulator/Replace 2. Disconnect battery lead (A). 3. Disconnect two stator leads (B). 4. Remove cap screw (C). 5. Push regulator toward cap screw; then lift from shroud. M37240 -UN-25JAN90 M37241 -UN-25JAN90 6. Install new regulator and fasten with cap screw (C). 7. Connect two stator leads (B) to “AC” terminals. T260 Engine (Top Photo) 8. Connect battery lead (A) to “B+” terminal. 9. For T260 engine only, install manifold cover and fasten with three cap screws. Tighten lift bracket cap screw to 11 ± 3 N·m (97 ± 27 lb-in.). B43E, B43G, B48G, P21G, or P220G M98,2055K,11 -19-02FEB87 55 7 CTM2 (19APR90) 55-7 16, 18, 20 & 24HP Onan Engines AllTractorManuals.com 130495