Starter/Specifications SPECIFICATIONS Item Measurement Specification BENDIX DRIVE STARTER Starter Pinion Backlash 0.13—0.89 mm (0.005—0.035) Brushes Wear Length 6.35 mm (0.25 in.) minimum Armature Lock Nut Torque 30 ± 3 N·m (265 ± 27 lb-in.) Battery Terminal Nut Torque 6 ± 1 N·m (53 ± 9 lb-in.) Negative Brush Cap Screw Torque 4.5 ± 0.5 N·m (40 ± 4.5 lb-in.) End Cap Thru-Bolts Torque 7 ± 1 N·m (62 ± 9 lb-in.) SOLENOID DRIVE STARTER Brushes Wear Length 11.5 mm (0.45 in.) minimum End Cap Thru-Bolts Torque 5.7 ± 1.1 N·m (50 ± 10 lb-in.) Solenoid Screws Torque 6 ± 1 N·m (53 ± 9 lb-in.) Armature Shaft Thrust Gap Clearance 0.1 to 0.5 mm (0.004 to 0.020 in.) Pinion-to-Stop Ring Gap Clearance 0.5 to 2.0 mm (0.020 to 0.079 in.) Starter Mounting Cap Screws Torque 34 ± 1 N·m (300 ± 9 lb-in.) B43E, B43G, B48G, T260 Engines:
Torque 51 ± 3 N·m (38 ± 2 lb-ft) Flywheel Mounting Cap Screw Lift Bracket Cap Screw Torque 11 ± 3 N·m (97 ± 27 lb-in.) M98,2060K,2 -19-11FEB87 60 2 CTM2 (19APR90) 60-2 16, 18, 20 & 24HP Onan Engines AllTractorManuals.com 130495