Intake Manifold and Cylinder Heads/Cylinder Head CTM2 (19APR90) 10-13 16, 18, 20 & 24HP Onan Engines AllTractorManuals.com 130495 7. For T260 engine, install left side shroud (D), exhaust pipe shroud (C), lift bracket (B) and fasten with seven cap screws. Tighten lift bracket cap screw to 11 ± 3 N·m (97 ± 27 lb-in.). For P218G or P220G engines, install left side shroud, lift side shroud, lift bracket, and fasten with four cap screws. Tighten lift bracket cap screw to 11 ± 3 N·m (97 ± 27 lb-in.). Connect voltage regulator leads. For B43E, B43G, OR B48G engine, install left side shroud (D), lift bracket (B), and fasten with five cap screws.
Tighten lift bracket cap screw to 11 ± 3 N·m (97 ± 27 lb-in.). Connect voltage regulator leads (E). Install the two stator leads on “AC” terminals and the battery lead on “B+” terminal of the voltage regulator. 8. Connect spark plug wire (A). -UN-25JAN90 A—Spark Plug Wire B—Lift Bracket C—Exhaust Pipe Shroud D—Left Side Shroud M36929 E—Voltage Regulator Leads T260 Engine -UN-25JAN90 M36930 B43E, B43G, B48G Engines M98,2010K,23 -19-10FEB87 10 13