Operating AutoPowr Transmission Adjusting Set Speeds To Match Varying Load Conditions All Tractors: Set speeds are obtained from measuring tractor axle speed combined with tire size details. Select a set speed that is approximately 3.2 km/h (2 mph) higher than the desired working speed in order to obtain maximum productivity in applications where a precise forward speed is not critical, such as plowing. The tractor will reach the higher set speed value during a no load or light load condition. A MPH km/h RXA0080538 —UN—09AUG05 A B Symbol (C) indicates engine is at full load and transmission is shifting to maintain peak tractor performance. Commanded speed may not match actual speed.
C Tractors Equipped with Radar: The ground speed (A) indicated on the display will always be lower than the set speed (B) if there is a measurable wheel slip. A—Ground Speed B—Set Speed C—Full Load Symbol OURX935,00004BA 1927AUG081/1 426 122208 PN=103