17.3 AERATED FUEL 1. Start and run the engine. 2. Run the engine at idle with a no-load for approximately 5 minutes, allowing the engine coolant to reach normal operating range. 3. Test drive the vehicle to ensure lack of power has been resolved. [a] If no lack of power occurred during the test drive, no further troubleshooting is required. Shut down the engine. [b] If lack of power occurred during the test drive, shut down the engine and . refer to section 17.4. (Rev. 2007) All information subject to change without notice. 17-14 From Bulletin 1–MBE 4000–07 6SE412 0702 Copyright © 2007 DETROIT DIESEL CORPORATION