CONTROLS AND INDICATORS 6 - MULTIFUNCTIONAL LEVER FOR THE WORK HYDRAU- LIC SYSTEM The work unit is operated with the multifunctional lever. The mul- tifunctional lever has 6 positions which control the work unit as follows: SW Floating position The multifunctional lever is locked in this position. The floating posi- tion is provided for planing opera- tions (removing subsoil). In this switch position, the work unit is lowered by its own weight, and can be freely operated by external parties. 75_016 S Lowering The boom is lowered in this posi- tion. 0 Paused The boom is held in position.
H Lifting If you draw the multifunctional le- ver further in the direction of ‘H’ (lifting), the lever is locked in this position until the boom has reached the top limit stop. Then, the multifunctional lever automati- cally returns to the ‘0’ position (Paused). E Bucket curl If you draw the multifunctional le- ver to position ‘E’ (Bucket curl), it is locked in this position until the bucket has reached the limit stop. Then, the multifunctional lever au- tomatically returns to position ‘0’ (paused). A Dumping In this position, the bucket is dumped. 69