General Information 00 Maintenance Operation Sets Table: 00–04 Maintenance Operation Sets for Groups 00 through 88 Maint. Oper. No. Operation Description Maintenance Interval 47–03 Fuel Tank Band Nut Tightening IM M1 M2 M3 M4 49–01 Exhaust System Inspection 49–02 CAT CGI Bellows Replacement 60–01 Cab Suspension Inspection 60–02 Mirror Folding Check 60–03 Aerodynamic Component Inspection 72–01 Door Seal, Door Latch, and Door Hinge Lubrication 83–01 Air Conditioner Inspection 83–02 HVAC Air Filter Cleaning and Replacement 88–01 Hood Rear Support Lubrication * For 5700 models, complete this procedure every 300,000 miles (485 000 km).
For Eaton Easy Pedal Advantage clutches, the interval is 50,000 miles (161 000 km) for linehaul applications. Intervals vary by transmission model, application, lubricant, and use. Contact Allison to determine the precise interval(s) for the transmission model and lubri- cant used on the vehicle. § For Detroit axles, complete this procedure once a year or at the following applicable interval, whichever comes first: every 5000 miles (8000 km) for Schedule I vehicles; or every 100,000 miles (161 000 km) for Schedule II vehicles. ¶ If equipped with an oil-coalescing desiccant cartridge, replace the cartridge once a year, regardless of mileage. Otherwise use the M4 maintenance interval.
** Complete this procedure every 25,000 miles (40 225 km), 3 months, or 500 operating hours, whichever comes first. Table 6, Maintenance Operation Sets for Groups 00 through 88 Western Star Maintenance Manual, September 2015 00/9