Vehicle Access and Features 2 1 A 3 01/06/95 f910068a A. Pull on loose end to shorten belt. 1. Buckle 2. Belt Release Button 3. Link Fig. 2.12, Lap Belt Adjustment 01/18/95 f910049a twisted. Check the engagement by trying to pull the link out of the buckle. If they come apart, repeat this step. If the problem continues, replace the belt. from misuse. Lap belts are designed to be worn by one person at a time. Fig. 2.11, Releasing the Three-Point Seat Belt (typical) NOTE: The belt can be shortened after it is con- nected by pulling on the loose end until the belt is snug, but comfortable. 1. Slowly pull the link end of the lap belt across your lap. See Fig. 2.12 .
If it is necessary to lengthen the belt, tip the link end downward and pull the link until it connects with the buckle. 3. To release the belt, push the release button on the buckle and pull the link from the buckle. 2. Fasten the lap belt by pushing the link into the buckle until they latch. Make sure the belt is not 2.10