FEATURES Parking (1) L (Low), H (High), N (Neutral), and R (Reverse) positions The end of the stopper lever is held by the return spring 1 . Then, the stopper lever tab is sepa- rated from the drive axle stopper to free the drive axle. (2) P (Park) position When the drive select lever is shifted to the “P” position, the cam lever of the shift cam pushes up on the end of the stopper lever. Then, the stopper lever tab pushes against the drive axle stopper to lock the drive axle. (3) Not synchronized If the stopper lever tab and the drive axle stopper are not synchronized, the torsion spring is compressed.
As a result, the spring pushes the stopper lever tab against the drive axle stopper and waits until the synchronization is completed. When the stop lever tab and the drive axle are synchronized, the stop lever tab pushes against the drive axle stopper in order to lock the drive axle. 1 Stopper lever 2 Return spring 3 Shift cam 4 Drive axle 2 2 2 3 1 3 3 1 1 4 4 4 (1) (2) (3) 1 - 8 GEN INFO