Suspension Chassis Front springs The new Arocs has steel-sprung front axles. The coding for the suspension of 4-axle vehicles is new, as the code now includes the springs for both front axles. W32.20-1037-00 Steel suspension with 2 driven front axles Rear springs In contrast to the Actros and Antos, the Arocs is available with air and steel suspension on the rear axle. The air suspension is the same as on the Actros and Antos. All-wheel drive vehicles are always equipped with planetary hub reduction axles and steel suspension. The designation of the steel springs has been changed. The new designation refers firstly to the load capacity and secondly to the number of rear axles.
The load capacity stated in the designation refers to both springs combined, in other words per axle. On vehicles with 2 driven rear axles, only one spring package is installed on each side in spite of the designation. 2 x 10.0 t means 2 times 10 t load capacity, i.e. a total of 20 t on the rear axles. W32.20-1036-00 Steel suspension with 2 driven rear axles 57 i Introduction of the New Truck Generation - The New Arocs (Model 964) – This printout will not be recorded by the update service. Status: 01 / 2013 –