SAFETY SAFETY NOTICE SAFETY SAFETY NOTICE IMPORTANT SAFETY NOTICE Proper service and repair is extremely important for the safe operation of your machine. The service and repair techniques recommended and described in this manual are both effective and safe methods of operation. Some of these operations require the use of tools specially designed for the purpose. To prevent injury to workers, the symbols and are used to mark safety precautions in this manual. The cautions accompanying these symbols should always be followed carefully. If any dangerous situation arises or may possibly arise, first consider safety, and take the necessary actions to deal with the situation.
GENERAL PRECAUTIONS clean and make sure that there is no dirt or oil on the floor. Smoke only in the areas provided for smoking. Mistakes in operation are extremely dangerous. Read the Never smoke while working. OPERATION & MAINTENANCE MANUAL carefully BEFORE operating the machine. PREPARATIONS FOR WORK 1. Before carrying out any greasing or repairs, read all 7. Before adding oil or making repairs, park the the precautions given on the decals which are fixed to machine on hard, level ground, and block the wheels the machine. or tracks to prevent the machine from moving. 2. When carrying out any operation, always wear safety 8.
Before starting work, lower blade, ripper, bucket or shoes and helmet. Do not wear loose work clothes, any other work equipment to the ground. If this is not or clothes with buttons missing. possible, insert the safety pin or use blocks to prevent the work equipment from falling. In addition, be sure ! Always wear safety glasses when hitting parts with a hammer. to lock all the control levers and hang warning signs on them. ! Always wear safety glasses when grinding parts with a grinder, etc. 9. When disassembling or assembling, support the machine with blocks, jacks or stands before starting work. 3.
If welding repairs are needed, always have a trained, experienced welder carry out the work. When carrying out welding work, always wear welding gloves, apron, glasses, cap and other clothes suited for welding work. 10. Remove all mud and oil from the steps or other places used to get on and off the machine. Always use the handrails, ladders or steps when getting on or off the machine. Never jump on or off the machine. If it is impossible to use the handrails, ladders or steps, use a stand to provide safe footing. 4. When carrying out any operation with two or more workers, always agree on the operating procedure before starting.
Always inform your fellow workers before starting any step of the operation. Before starting work, hang UNDER REPAIR signs on the controls in the operator's compartment. PRECAUTIONS DURING WORK 11. When removing the oil filler cap, drain plug or hydraulic pressure measuring plugs, loosen them slowly to prevent the oil from spurting out. Before disconnecting or removing components of the oil, 5. Keep all tools in good condition and learn the correct way to use them. 6. Decide a place in the repair workshop to keep tools and removed parts. Always keep the tools and parts in their correct places. Always keep the work area 00-5