MAINTENANCE PROCEDURE MAINTENANCE Replacing element 0. 1. Open the engine hood, remove clip (2), then remove cover (3). 2. Remove outer element(4). Do not remove inner element(5) at this time, however. 3. Clean the interior of the air cleaner body, cover (3) and evacuator valve (6). 4. Remove inner element(5), then install a new inner element immediately. 5. Set the new outer element (4) in position. 6. Set the arrow mark on cover (3) at the top, install to the air cleaner body, then secure with clip (2). 7. Return the red piston in the dust indicator(1) to its original position. 4-20