Service Tools - Cylinder Block Section 1 - Cylinder Block - Group 01 M11 Page 1-4 Tool No. Tool Description Tool Illustration Gear Puller Remove the crankshaft gear. Requires jaw, Part No. 3375839, to be used. 3375840 Lifting Strap Lift the cylinder block or crankshaft. 3375957 Guide 3376069 Replace cylinder block camshaft bushings. Used with camshaft bushing driver set, Part No. 3376637. Driver Replace cylinder block camshaft bushings. Used with camshaft bushing driver set, Part No. 3376637. 3376070 Regulator Valve Seat Driver Used to install the high oil pressure seat in the cylinder block.
3376486 Master Ring Gauge Use to set dial indicator gauge to measure cylinder block main bearing bore. 3376576 Camshaft Bushing Driver Set Replace cylinder block camshaft bushings. Used with guide, Part No. 3376069, and driver, Part No. 3376070. 3376637 Connecting Rod Mandrel Set 3376690 Used to measure bend and twist with connecting rod checking fixture, Part No. ST-561. Mandrel, Part No. 3376691, used for crankshaft end of connecting rod. Mandrel, Part No. 3376692, used for piston pin end without bushing. Mandrel, Part No. 3376693, used for piston pin end with bushing.