Camshaft, Balancer Shafts and Timing Gear Train/Auxiliary drive (camshaft-gear-driven) INSTALL WEAR RING 1. When equipped, install the wear ring with chamfered side (A) toward engine. Be sure that the O-ring is in place against the oil deflector. 2. Install shaft key. CD30612 -UN-04MAY98 CD,CTM125,130 -19-01DEC97 CTM3274 (01JUL99) 20-35 Saran Liter Engines 060799 PN=158 INSTALL AUXILIARY EQUIPMENT DRIVEN BY CAMSHAFT GEAR (19 KW AUX. DRIVE) -UN-16JUN98 -UN-03FEB93 CD30613 CD30354 1. Install shaft key and gear (A) onto accessory shaft. 2. Install accessory with gasket on engine (arrow). Tighten nut (B) to 55 N·m (41 lb-ft) then, if equipped, bend tabs of washer up against nut. 3.
Tighten the two fastening cap screws or nuts (C) to 50 N·m (35 lb-ft). CD,3274,G20,44 -19-04JAN99 20 35