Air Intake and Exhaust System/Turbocharger CHECK RADIAL BEARING CLEARANCE (SCHWITZER TURBOCHARGER) 1. Remove compressor cover. 2. Install a dial indicator against shaft end. CD30658 -UN-04MAY98 2. Move shaft alternately toward and away from indicator. Range of travel should be within 0.74—0.81 mm (0.029—0.032 in.) If radial clearance is not within specifications, replace turbocharger. CD,3274,G35,20 -19-04JAN99 CTM3274 (01JUL99) 35-9 Saran Liter Engines 060799 PN=238 AXIAL END PLAY CHECK 1. Using a dial indicator with indicator rod against shaft, measure axial end play. -UN-23MAY95 2. Move shaft axially back and forth by hand. Indicator reading should be within: • GARRETT TURBOCHARGER —TA25:
0.025—0.09 mm (0.001—0.0035 in.) CD7302 —TA31: 0.025—0.10 mm (0.001—0.004 in.) —TA34: 0.025—0.10 mm (0.001—0.004 in.) —TA38: 0.025—0.10 mm (0.001—0.004 in.) —T300: 0.025—0.10 mm (0.001—0.004 in.) —T350: 0.025—0.10 mm (0.001—0.004 in.) • SCHWITZER TURBOCHARGER —S2A: 0.09—0.14 mm (0.0035—0.0055 in.) CD,3274,G35,7 -19-04JAN99 35 9