Engine System - Diagnosis and Tests/Using STANADYNE ’’TIME-TRAC’’ as Tachometer USING STANADYNE “TIME-TRAC” AS TACHOMETER The STANADYNE “TIME-TRAC” meter can be used as a tachometer by using clamp-on transducer FKM10429-5 (A) on any high-pressure line. CD30207 -UN-07MAR95 CD30206 -UN-07MAR95 Operating instructions 1. Remove paint and thoroughly clean the area of the high-pressure line to which the clamp-on transducer is to be attached. 2. Install transducer (A) and connect cable FKM10429-3 (B) between transducer and socket meter (C). Also connect ground wire. 3. Switch on the meter by pressing the “ON/CLEAR” key and start the engine.
A—Clamp-on transducer FKM10429-5 B—Cable FKM10429-3 C—Timing meter FKM10429-1 CD,3274,G210,10-19-15MAY92 210 10 CTM3274 (01JUL99) 210-10 Saran Liter Engines 060799 PN=333