Cyl. Block, Liners, Pistons & Rods/Piston & connecting rod assembly 10 CTM3274 (01JUL99) 10-31 Saran Liter Engines 060799 PN=92 PISTON/LINER SET INFORMATION Service piston is available only as an assembly including: • Liner (A) • Piston (B) • Piston ring set (C) • Liner seal set (D) NOTE: Liner, piston ring set and liner seal set are -UN-16JUN98 available separately. Piston/Liner sets may be packaged in an anti-corrosion bag and therefore are not coated with oil or grease. Before to open the bag, be sure that the parts will be CD30579 installed immediately to prevent any risk of getting corroded parts. CD,CTM125,080 -19-01DEC97 PISTON AND CONNECTING ROD ASSEMBLY NOTE:
Pistons must be installed on connecting rods from which they were removed. -UN-28MAR90 1. Assemble pistons and connecting rods, making sure the word “FRONT” (A) on the side or top of the piston and on the side of the connecting rod are on the same side. RG5627 IMPORTANT: If “FRONT” is not visible on side or top of piston, install piston on rod so that offset in combustion bowl of piston is opposite camshaft side of engine. The long side of the connecting rod should face camshaft side of block. -UN-18JAN95 2. Coat piston pin (B) with engine oil and insert it through piston and connecting rod bores. Install NEW piston pin retaining rings (C) with sharp edge of ring facing away from piston pin.
Make sure retaining rings are seated correctly in their grooves. CD30006 1—Camshaft side 2—Centerline of liner bore 3—Combustion chamber offset CD,3274,G10,12 -19-18FEB92 31