PERIODIC SERVICE 66 B Changing Front Axle Case Oil 1. Park the vehicle on a firm, flat and level surface. 2. To drain the used oil, remove the drain and filling plugs at the front axle case and drain the oil completely into the oil pan. 3. After draining, reinstall the drain plug. 4. Fill with the new oil up to the upper notch on the dipstick. (See "LUBRICANTS, FUEL AND COOLANT" in "MAINTENANCE" section.) 5. After filling, reinstall the filling plug. EVERY 500 HOURS B Adjusting Engine Valve Clearance If you do not have the proper tools and/or are not mechanically proficient, consult your local KUBOTA Dealer for this service.
B Checking Engine Timing Belt If you do not have the proper tools and/or are not mechanically proficient, consult your local KUBOTA Dealer for this service. EVERY 1000 HOURS B Replacing Engine Timing Belt If you do not have the proper tools and/or are not mechanically proficient, consult your local KUBOTA Dealer for this service. EVERY AFTER 1000 HOURS B Cleaning Engine Combustion Chamber If you do not have the proper tools and/or are not mechanically proficient, consult your local KUBOTA Dealer for this service.
EVERY 1 YEAR B Replacing Air Cleaner Primary Element and Secondary Element (See "Cleaning Air Cleaner Primary Element" in "EVERY 100 HOURS" in "PERIODIC SERVICE" section.) B Replacing Pre Cleaner Element (See "Cleaning Pre Cleaner Element" in "EVERY 100 HOURS" in "PERIODIC SERVICE" section.) (1) Drain plug (2) Filling plug with dipstick (A) Oil level is acceptable within this range Oil capacity 0.21 L (0.22 U.S.qts.)