71 PERIODIC SERVICE B Replacing Slow-Blow Fuses The slow-blow fuses are intended to protect the electrical cabling. If any of them have blown out, be sure to pinpoint the cause. Never use any substitute, use only a KUBOTA genuine part. B Replacing Light Bulb 1. Head lights Take the bulb out of the light body and replace it with a new one. 2. Other lights Detach the lens and replace the bulb. C Replacement procedure 1. Disconnect the negative cable of the battery. 2. Remove the cover and the slow-blow fuse box cover. 3. Pull out the slow-blow fuse. 4. Insert a new slow-blow fuse into the slow-blow fuse box. 5. Install the slow-blow fuse box cover. 6. Connect the negative battery cable.
(1) Slow-blow fuse box C Protected circuit Light Capacity Head lights 27 W Tail light 5 W Brake light 21 W Easy Checker(TM) 3.8 W (14V, 0.27A) Instrument panel light 3.8 W (14V, 0.27A) Fuse No. Capacity (A) Protected circuit 1 Slow-blow fuse (50) Key switch 2 Slow-blow fuse (60) Alternator