259 259 GREASE PUMP REF NO. PART NUMBER QTY DESCRIPTION REMARKS INCL REF NO'S 1-20 350-398 GREASE PUMP PARTS 1. 107-492 1 SCREW (M8-1.25 X 35MM,ALL THD) 2. 106-078 1 NUT (M8-1.25) 3. 350-686 1 CYLINDER CAP 4. 350-692 1 INLET TUBE 5. 157-049 2 O-RING (113 D70) 6. 350-421 1 ADJUSTING SPOOL 7. 350-671 1 ROD GUIDE 8. 350-682 1 BARREL 9. 117-228 1 COMPRESSION SPRING 10. 125-424 2 BRONZE BUSHING (.750") 11. 350-691 1 VALVE SEAT 12. 117-227 2 SEAL (POLY PAK) 13. 350-687 1 PUMP BODY 14. 125-125 1 DETENT BALL (.750") 15. 155-702 2 O-RING (920 D90) 16. 308-603 - PLUNGER SEE FOOTNOTE 1 SEE FOOTNOTE 2 17. 155-748 1 O-RING (916 D90) 18. 350-693 1 PUMP BARREL 19. 301-0196 1 RETAINER CLIP 20.
105-525 1 ROLL PIN (3/16" X 1/4") 21. 178-467 1 ROD CAP 166-280 1 PLUNGER SEE FOOTNOTE 2 SEE FOOTNOTE 3 SEE FOOTNOTE 2 SEE FOOTNOTE 2 NOT SHOWN: FOOTNOTES: 1. INSTALL WITH SMALLER BEVEL TOWARD INSIDE OF PUMP 2. USE 166-280, 178-467 & 105-525 TO SUPERSEDE 308-603 2. USE 166-280, 178-467 & 105-525 TO SUPERSEDE 308-603 3. RETAINER CLIP 301-0196 SUPERSEDES CLIP 105-653. NOTE: 03 ID0091999