63 63 CLAMP ASSEMBLY REF NO. PART NUMBER QTY DESCRIPTION REMARKS 1. 151-031 1 CYL (2" X 1" X 8") 2. 184-789 1 TAPERED PIN (25.4MM X 158.7MM) 3. 178-075 1 TAPERED PIN (31.7MM X 240MM) 4. 118-053 16 EXTERNAL SNAP RING (.875") 5. 105-1133 8 PIN 6. 303-360 1 STATIONARY CLAMP 7. 303-624 1 ROTATION CLAMP 8. 151-206 4 CYL (4.50" X 2.25" X 2.75") BEFORE S/N:CMWA27T2E6000020 AFTER S/N: CMWA27T2A6000021 9. 303-817 4 JAW BLOCK 151-212 4 CYL (4.50" X 2.25" X 2.75") LOCTITE 242. BEFORE S/N:CMWA27T2E6000020 AFTER S/N: CMWA27T2A6000021 10. 350-446 8 GRIPPER INSERT 329-179 4 JAW BLOCK 11. 106-616 8 SCREW (M16-2 X 55MM, CL10.9) 12. 106-545 8 LOCKNUT (M16-2.0,PRV TRQ,10.9) 13. 308-643 8 RETAINER FORGING 14.
105-022 8 BOLT (3/8-NC X 4") LOCTITE 242 15. 178-456 4 BUSHING 1.25ID X 1.75OD X 1.75 16. 115-003 8 ZERK (1/4-NF, STR) 17. 181-981 1 TAPERED INSERT (1") 18. 105-245 1 SCREW (M10-1.50 X 25MM) 19. 106-006 4 WASHER (.531", HARDENED) LOCTITE 609 20. 107-507 4 SCREW (M12-1.75X65MM) FULL THD 21. 308-795 1 WRENCH MOUNT BRACKET, FRONT RH 22. 308-796 1 WRENCH MOUNT BRACKET, REAR RH LOCTITE 242 23. 178-489 2 PIN 24. 306-783 2 BACKUP PLATE 25. 125-771 1 COMPOSITION BUSHING (1.25") 26. 106-398 8 WASHER (M16, HARDENED) 27. 117-297 4 COMPRESSION SPRING 28. 303-622 1 RETAINER 29. 106-659 7 SCREW (M12-1.75 X 55MM) 30. 106-397 7 WASHER (M12, HARDENED) 31. 106-685 1 LOCKNUT(M12-1.75,PRV TRQ,10.9) 32.
110-096 7 MACHINERY BUSHING (1/2") NOT SHOWN: 117-437 AR SHIM PLATE, FRONT MOUNT 117-436 AR SHIM PLATE, REAR MOUNT FOOTNOTES: NOTE: 06 ID0143027