9 Driving and transportation 9.6 Hitch 67085 Type AK 64/1 B ... Secure the rear axle of the transport carriage so it will not roll away. If required, release the trailer steering axle brake. The drawbar must be freely moving in all directions. With rigid-drawbar trailers, the hitch eye must hit the centre of the hitch (2). Failure to observe this rule will cause damage! If required, set the hitch eyes to the height of the coupling point. Press pawl (4) and handle of pin (5) together and pull out of the trailer hitch. Clean the trailer hitch with a suitable agent. Back up tractor slowly until the hitch eye makes contact with the trailer hitch. 4 5 6 7 Trailer hitch type AK 64/1 B ...
30204 47 Danger! Lock not engaged. Trailer releases from the towing vehicle. Death or serious injuries! Ensure that the lock is securely engaged. Never pull a trailer with the lock disengaged. Press pawl (4) and handle of pin (5) together and plug pin (5) into the trailer hitch up to the stop (6). Release the pawl (4) and ensure that lock (7) has engaged at the trailer hitch. Raise the trailer support wheel. Connect the power supply plug. If present, connect the breakaway cord to the trailer hitch. Check the trailer lighting. If there is a braking system, carry out a brake test. Type 810 ... 4 Secure the rear axle of the transport carriage so it will not roll away.
If required, release the trailer steering axle brake. The drawbar must be freely moving in all directions. With rigid-drawbar trailers, the hitch eye must hit the centre of the hitch (2). Failure to observe this rule will cause damage! If required, set the hitch eyes to the height of the coupling point. Push down pawl (4) and pull pin (5) out of the trailer hitch. Clean the trailer hitch with a suitable agent. Back up tractor slowly until the hitch eye makes contact with the trailer hitch. 7 5 6 Trailer hitch type 810 ... 20717 48 162 00 0293 210 2 - BA DOMINATOR 150/140/130 - 12/09