10 Fieldwork settings 10.3 Threshing mechanism 67086 Move the lever (H) all the way downwards. Then let the lever (H) engage in the adjusting segment according to the threshing concave version. Pulling up the threshing concave ensures that it can be correctly adjusted. H Turn threshing drum by hand. Mark the threshing drum beater bar with the larg- est radius (measuring bar) on the left and right machine side. The clearance from the threshing concave is then adjusted at this marked beater bar. 19428 10 Set the distances (A and B) of the threshing con- cave on both sides at the turnbuckles (1) of the tow bars. - Loosen the nuts of the turnbuckles (1).
- Adjust the turnbuckles until you obtain the threshing concave basic adjustment. - Check the distances (A and B) again. - Lock the nuts of the turnbuckles (1). B 1 1 A 11 19607 178 00 0293 210 2 - BA DOMINATOR 150/140/130 - 12/09