13 Maintenance 13.2 General Information 67089 83929 13.2.18 Cleaning of surfaces with decals applied Caution! Cleaning areas where adhesives have been applied with a high-pressure jet cleaner. The decals will be damaged. Avoid cleaning with a high-pressure jet cleaner. Clean such areas with a high-pressure jet cleaner only from a sufficient distance. Set the water pressure and the water temperature as low as possible. Do not stress decals mechanically when cleaning. Replace damaged and illegible decals (hazard warning signs / safety decals / lettering) immediately.
38041 13.2.19 Winter storage instructions for combines Winter storage of the machine after the harvest is nec- essary in order to protect the capital invested into the machine. Thorough and conscientious maintenance and cleaning and the replacement of worn or damaged parts at this point will save time and money when the machine is required for operation again. WARNING: Cleaning of front attachment / machine with water. Material damage by corrosion. Avoid cleaning with water. Before and after cleaning with water grease all grease points. After that, let the front attach- ment/machine run for some minutes. Do not clean hollow spaces and cable leadthroughs with water.
Clean the machine thoroughly inside, particularly the threshing drum, concave, the space behind the drum, the preparation floor, return floors, straw walkers and above the cleaning fan. Open the elevator covers and auger troughs. Clean the exterior of all bearings thoroughly of grease and dust. Preserve the machine including the grease points to be greased at annual intervals after the harvest by pressing in brand-name grease. 00 0293 210 2 - BA DOMINATOR 150/140/130 - 12/09 267