13 Maintenance 13.5 Engine 67089 86235 13.5.17 Changing the fuel filter PERKINS 1006-6T Observe the general warnings at the beginning of the "Maintenance" chapter. Observe the information provided in the operator's manual of the engine manufacturer. Environment! Lubricants and fuels end up in the environment. Environmental pollution. Lubricants and fuels must be collected and stored in suitable containers and dis- posed of in a way that is harmless to the environment and in accordance with existing anti-pollution regulations. WARNING: Soiling of fuel system. Machine damage. Make sure surroundings are clean. Use suitable and clean tools. Ensure that no dirt can enter the fuel system.
1 Close the shut-off tap of the fuel system. Drain fuel from filter. - Hold a suitable container for the remaining fuel in the sight glass (4) beneath the hose. - Slacken off the drain plug. - Collect escaping liquid in a suitable container. - Tighten drain plug. Unscrew filter (1) with sight glass (4). 4 WARNING: 29 Use of unpermissible spare parts or lubricants. 29344 Machine damage or increased wear. Spare parts and lubricants must at least comply with the technical standards required by the manufacturer of the implement! The use of genuine CLAAS spare parts and lubricants is recommended. Clean the inside of the filter head.
Apply some oil to the new seal and screw new filter (1) with sight glass (4) to the filter head at right angles and centred. Open the shut-off tap of the fuel system. 290 00 0293 210 2 - BA DOMINATOR 150/140/130 - 12/09