144 Warning/indicator lamps in the status area of the on-board computer Hydrostatic drive system On-board computer and displays If there is a fault, warning or operating infor- mation, a warning lamp or indicator lamp lights up in status area : of the on-board computer. The warning lamp/indicator lamp lights up in a different colour, depending on the priority of the fault, warning or the oper- ating information. The warning lamp/indica- tor lamp may also light up in addition to an event window.
Warning/indicator lamps in the sta- tus area of the on-board computer Important safety notes If you ignore warning and indicator lamps, you will not be able to recognise failures and mal- functions in components or systems. Driv- ing/braking characteristics may be affected and the operating and road safety of your vehicle may be limited. Have the affected sys- tem checked and repaired at a qualified spe- cialist workshop. Always observe the warning and indicator lamps and follow the corre- sponding measures. Overview Display messages Possible causes/consequences and M Solutions X Hydrostatic drive malfunctioning Operate the brake Supplementary text: Visit workshop.
The hydrostatic drive system has been deactivated due to a mal- function (overheating, damage, short circuit) and no longer exerts any force. X Stop the vehicle as quickly as possible, paying attention to traf- fic conditions. X Switch off the engine. X Apply the parking brake. X Check the components of the hydrostatic drive system for external damage. X Consult a qualified specialist workshop.
Warning and indicator lamps · An emissions-relevant malfunc- tion in the BlueTec® exhaust gas aftertreatment system or low AdBlue® supply (Y page 113) 5 Engine oil pressure too low (Y page 140) 4 Engine oil level too low, top up engine oil (Y page 297) # Battery charge level too low ª Power supply malfunction (Y page 137) ¯ Maintenance due date (Y page 134) ¦ Oil level in the steering is too low (Y page 134)