mercedes-benz — Operating lever

170 Telligent ® gearshift lection is stored for approximately 120 seconds. or Operating lever X To upshift: briefly pull the cruise control lever towards = the steering wheel. The transmission control shifts up one gear. The preselected gear flashes in the on- board computer display. The gear prese- lection is stored for approximately 120 seconds. Overview The control lever has equal status with the multifunction lever and the cruise control lever. The control lever can be used alter- nately. Driving mode X Make sure that the vehicle speed is below 30 km/h. Direction of travel preselection X Make sure that the speed limiter ( Y page 191) and cruise control ( Y page 193) are deactivated.

X Turn the direction of travel selection switch to the h (drive/driving forwards) position. : u button, to change direction ; To drive forwards/to reduce speed when reversing = To reverse/to reduce speed when driving forwards X Direction of travel preselection, reverse: briefly push the cruise control lever to the left ? . A warning tone sounds. or Direction of travel preselection X Make sure that the vehicle speed is below 30 km/h. X Direction of travel preselection, forward: briefly push the cruise control lever to the right ; . A warning tone sounds. X Make sure that the speed limiter ( Y page 191) and cruise control ( Y page 193) are deactivated.

X Reduce speed until the vehicle is almost stationary. X Turn the direction of travel selection switch to the h (drive/driving forwards) position. X Depress the clutch pedal. A signal tone and a clacking noise in the instrument cluster sound; the preselected gear is selected. The u indicator lamp in the status area of the on-board computer display lights up. The on-board computer display shows the engaged gear. X Move the operating lever in direction ; or = . or X Press the u button : forwards or back- wards. A warning tone sounds. X Slowly release the clutch pedal and depress the accelerator pedal. X Reduce speed until the vehicle is almost stationary. X Depress the clutch pedal.

A signal tone and a clacking noise in the instrument cluster sound; the preselected gear is selected. The u indicator lamp in the status area of the on-board computer