276 Tipper platform to swing freely. The rear platform dropside will otherwise drop down and be damaged. Removing the post X Make sure that the tipper platform is unloa- ded. X Ensure that rear catch levers : on the left and right are closed. Working mode X Pull platform dropside locking lever ; in the direction of the arrow. The platform dropside can now swing freely. X Swing all catch levers : up and the plat- form dropside down. X Swing all catch levers : down as far as they will go. X Unscrew screws = in post ; . Releasing the rear platform dropside G WARNING When the catch lever and the locking lever of the rear dropside are open, it is only loosely held in its mounting.
The tailgate can fall down. There is a risk of injury. Before opening, ensure that no-one is in the area behind the dropside. X Remove post ; . Rear platform dropside access steps A second person is required when closing the catches and when releasing the platform dropside. X Make sure that the tipper platform is unloa- ded. X Pull platform dropside locking lever ; in the direction of the arrow. Use the platform dropside access steps to safely climb onto the platform. X Swing rear catch lever : upwards to the left and right. The platform dropside is released. X Open the tailgate ( Y page 275). X Fold out step = . X Use grab handle : , step ; and fold-out step = .
X Remove the platform dropside. X Swing rear catch lever : downwards to the left and right as far as it will go.