Maintenance 293 X Tighten quick-release fasteners ; on grab handle : . X Vehicles with a mowing door: swing the additional mirror up and secure the hand- rail ( Y page 72). G WARNING The cooling system is pressurised, particu- larly when the engine is warm. If you open the cap, you could be scalded if hot coolant sprays out. There is a risk of injury. Let the engine cool down before you open the cap. Wear gloves and eye protection. Open the cap slowly to release the pressure. Coolant level Maintenance and care G WARNING Service product can be poisonous and haz- ardous to health. There is a risk of injury.
Observe the instructions on the respective original container when using, storing and dis- posing off service products. Always store ser- vice products in the sealed original container. Always keep service products out of the reach of children. Unlocking/locking the front flap Two people are required to remove/replace the front flap. Removing the front flap X Vehicles with a mowing door: release the handrail and swing the additional mirror down ( Y page 72). ! Do not operate the vehicle if the coolant level is too low. Otherwise, the engine may be damaged. X All vehicles: take the square spanner out of the tool bag ( Y page 312). X Park the vehicle on a level surface.
X Unscrew quick-release fasteners ; on grab handle : . X Apply the parking brake. X Switch off the engine. X Unlock fasteners = with the square span- ner in the direction of arrow ? . X Switch the ignition lock to position 0 . X Pull front flap up and remove. X When checking/topping up the coolant make sure that you have a secure footing. Replacing the front flap X Attach the front flap. X Position quick-release fasteners ; on grab handle : and screw in slightly. X Lock fasteners = with the square spanner in the direction of arrow A . Z