Maintenance 295 Checking the coolant level and topping up Vehicles with Telligent ® automatic gear- shift Vehicles with Telligent ® gearshift or Tell- igent ® automatic gearshift: : Cap ; Max. mark = Min. mark Maintenance and care : Screws ; Cover = Cap ? Max. mark A Min. mark X Raise the tipper platform ( Y page 277). or X Tilt the cab forwards ( Y page 314). X Check: inspect the brake fluid level in the expansion tank. The brake fluid level must be at maximum mark ; . If the brake fluid level has dropped signifi- cantly below maximum mark ; , there may be a leak in the clutch actuation system. Have the clutch actuation system checked as soon as possible at a qualified specialist workshop.
X Remove cover ; . X Remove screws : . X Check: inspect the brake fluid level in the expansion tank. The brake fluid level must be at maximum mark ? . If the brake fluid level has dropped signifi- cantly below maximum mark ? , there may be a leak in the clutch actuation system. Have the clutch actuation system checked as soon as possible at a qualified specialist workshop. X To top up: unscrew cap : . X Observe the information on brake fluid ( Y page 361). X Make sure that the strainer is fitted. X To refill: unscrew cap = . X Observe the information on brake fluid ( Y page 361). X Top up the brake fluid. Only fill the expansion tank to maximum mark ; . X Top up the brake fluid.
Only fill the expansion tank to maximum mark ? . X Make sure that the strainer is fitted. X Replace cap : and screw it on. X Lower the tipper platform ( Y page 277). or X Replace cap = and screw it on. X Tilt the cab back into the driving position ( Y page 314). X Replace cover ; and tighten screws : . Z