24. SERVICE PROCEDURE 24.7.2 CHANGE OIL IN REAR BRAKE COOLING OIL TANK WARNING The oil is at high temperature after the engine has been oper- ated, so never change the oil immediately after finishing opera- tions. Wait for the oil to cool down before starting the operation. When removing the oil filler cap, turn it slowly to release Container to catch drained oil: Min. 143 ¬ capacity Refill capacity: 143 ¬ (37.75 US gal, 31.46 UK gal) 1. Lower the dump body and stop the engine. 2. Turn the cap of oil filler F to release the internal pressure before removing the cap. 3. Remove drain plug 1 , then loosen drain valve 2 slowly to avoid getting oil on yourself, and drain the oil. 4.
Add engine oil through oil filler F to the specified level. For details of the oil to use, see “20. USE OF FUEL, COOLANT, AND LUBRICANTS ACCORDING TO AMBIENT TEMPERATURE”. 5. After adding oil, check that the oil is at the specified level. See “24.3 CHECK BEFORE STARTING”. 3-71