26. HANDLING PAYLOAD METER RESETTING TIME WARNING Never try to reset the time when traveling. 1. When time set adjustment switch 1 is pressed for at least 2 seconds, the minute display will flash. Press time adjustment increase switch 3 to set the minute display correctly. 2. When time adjustment switch 2 is pressed for at least 2 sec- onds, the hour display will flash. Press time adjustment increase switch 3 to set the hour display correctly. 3. Following this, each time that time adjustment switch 2 is pressed, the flashing point changes to day, month, and year. Press time adjustment increase switch 3 to correct any item that needs correcting. AD134750 4.
After setting the time correctly, press time set adjustment switch 1 . OPERATING LIGHTING DIMMER SWITCH To change the brightness of the display, do as follows. 1. Each time dimmer switch 1 is pressed, the lighting becomes one stage dimmer. If the switch is pressed again after it reaches the dimmest level, it will change to the brightest level. The brightness can be changed in 10 stages. If it is pressed continuously, the brightness will change continu- ously. AD134760 5-8