29. TACHOGRAPH (TCO 15-6) 7. SPEED INDICATION CONFIRMATION LAMP This is interconnected with the speedometer and is used to confirm the speed indication. When using the confirmation switch to light up the confirmation lamp during checks before starting, always check for any disconnection in the three indication confirmation lamps. Models with the speed indication confirmation lamp do not have the speed warning lamp. 8. ODOMETER This displays the total distance (km) traveled by the machine. 9. PERIOD INDICATING LABEL This indicates that it is for 7 days. 10. SPEED RECORDING STYLUS This records the momentary speed of the machine on the chart. 11.
OPERATOR CHANGE RECORDING STYLUS When the operator change key is used, the operator change is recorded on the chart. 12. TRAVEL DISTANCE RECORDING STYLUS This records the distance travel by the machine on the chart. One up-and-down recording motion is 10 km. 13. ADJUSTMENT SCREW FOR SPEED WARNING LAMP The speed at which the lamp gives a warning can be set as desired. 14. SPEED CONFIRMATION APERTURE FOR SPEED WARNING LAMP INDICATION This is the speed indication aperture for setting the desired speed. 15. CLOCK SETTING KNOB Turn clockwise to advance the hand, and counterclockwise to turn the hand back. 16.
CHART SUPPORT This is the rotating part of the clock and has teeth to prevent the chart from slipping. 17. PRESSING RING This is a ring that presses the chart and holds it against the chart support. 5-17