33. HANDLING AUTO-GREASING SYSTEM 33.1.3 METHOD OF SETTING When setting the various items, the value is not input directly. Select the code number from the set code table below, and set as follows. Setting code table Code no. 9 Greasing interval (Hr) (a) / Greasing time (min) (b) / Greasing frequency limit (c) / NOTICE When using the machine at ambient temperatures of below –20°C, set to greasing time (b) at code No. 7. Procedure for setting Turn the starting switch ON and start the engine. 1. Press the LEVEL and ITEM keys at the same time to set to the setting mode. 2. Press the ITEM key one or more times to select the item to be set.
REMARK Each time the ITEM key is pressed, the setting item is changed: a b c a. 3. When the item to be set flashes, press the LEVEL key. The set item and numeral are displayed alternately (a 0 a 0). 4. Refer to the setting code table and press the ITEM key one or more times to select the code number to be set. REMARK Each time the ITEM key is pressed, the code number (numeric portion) goes up by 1. 5-36 0 1 2 3 4 5 6 7 8 / 1 1.5 2 3 4 5 6 8 / 2 3 5 7 10 15 20 25 / 25 50 75 100 150 200 250 /