John Deere 450DLC — Tech 2 Diagnostic Scan Tool Connection Procedure

TM2361 (24JUN08) 9015-20-21 450DLC Excavator Operation and Tests 062608 PN=511 References 19. Engine Applications Menu will appear. See list of functions of Tech 2. Engine For FO: Diagnostic Trouble Codes See Reading Diagnostic Trouble Codes With Tech 2 Diagnostic F0: Diagnostic Troubule Codes Scan Tool. (Group 9015-20) See list of functions of F1: Data Display Tech 2. F2: Snapshot F3: Actuator Test For F1: Data Display See Tech 2 Data Display. F4: Programming (Group 9015-20) See list of functions of Tech 2. F5: ??KA ID Infomation The F2: Snapshot will save information received by the machine controller. Tech 2 can only hold data from two different snapshots.

This data is saved on a –19–24APR06 first-in, first-out basis. If a third snapshot is taken the data from the first snapshot will be overwritten. If the data must be saved, highlight the data and select “Write Protect” using the softkeys. Highlight the data TX1005648 and select “Clear” with the softkeys to cancel the protect. See list of functions of Tech 2. Engine Applications Menu The F3: Actuator Test enables access to common rail system tests, and device control tests. See Rail Pressure Control Test, or See Injector Balance Test (Injector Misfire Test), or See Injector Force Drive Test , or See EGR Regulating Valve Test. (Group 9010-25). See list of functions of Tech 2. For F4:

ProgrammingSee Injector ID Code Registration (Group 9010-25) See lists of functions of Tech 2. The F5: ID Information displays ID information. See list of functions of Tech 2. Continued on next page JC89288,00001A1 –19–21APR06–12/13 9015 20 21