References 5. Monitor Display will show the status of switches, sensors, and controller signals on the machine. See Monitor Display later in this procedure. SelectFunction Monitor Display Special Function will allow control over some functions of the machine. See Special Function later in this procedure. Special Function Setup adjusts parameters of machine operation. See Setup later in this procedure. Setup TX1002951 –19–25JAN06 ESC will return to Dr. ZX start screen. ESC Main Controller Select Function Screen LD30992,0000220 –19–25APR06–5/30 TM2361 (24JUN08) 9015-20-35 450DLC Excavator Operation and Tests 062608 PN=525 1. Monitor Display Enter Model and Serial No.
After selecting Monitor Display, enter the model and serial number of the machine. Model 0001 Ex. Mach.No.(HCM1G600P12 Select OK to continue after entering model and serial number. 3456) Model(01G6) ESC will return to Main Controller Select Function Serial No.000001 Screen. Ex. Mach.No.(HCM1G600P12 –19–25JAN06 NOTE: Model and serial numbers are not necessary to 3456) Serial No.(123456) proceed. Model and serial numbers will be necessary if a recording is to be taken. TX1002998 OK ESC Enter Model and Serial Number Screen Continued on next page LD30992,0000220 –19–25APR06–6/30 9015 20 35