References Main Controller (MCF) Remove and Install 1. Disconnect battery ground (-) cable. 2. Remove rear cover. See Rear Cover Remove and Install. (Group 9015-20.) TX1000923A –UN–08DEC05 3. Disconnect electrical connectors (1). 4. Remove cap screws (2). 5. Remove main controller and mounting bracket. Main Controller 6. Remove screws (3). 7. Replace as necessary. 1—Electrical Connectors 2—Cap Screw (4 used) 3—Screw (4 used) TX1000925A –UN–01DEC05 9015 20 ,109 Main Controller LD30992,0000233 –19–16MAR06–1/1 TM2361 (24JUN08) 9015-20-109 450DLC Excavator Operation and Tests 062608 PN=599