John Deere 450DLC — Repair 32 and 48 Way CINCH™ Connectors

TM2361 (24JUN08) 9015-20-131 450DLC Excavator Operation and Tests 062608 PN=621 References 7. Remove old terminal and strip 4.85 mm (0.191 in.) of insulation from wire. 8. Grip JDG1727 Terminal Crimping Tool (A) securely, and squeeze ratcheting mechanism until it bottoms out. –UN–10SEP03 Then allow it to open completely 9. With tool in ready position (open handle), open terminal receptacle (B). RXA0070479 10. Insert terminal (C) into proper wire gauge window, crimp wings facing up. 11. Close terminal receptacle (B). 12. Squeeze handle until two clicks are heard. 13. Insert stripped wire (D) into terminal. –UN–10SEP03 14. Hold wire stationary and squeeze tool together until ratchet releases.

RXA0070480 15. Remove terminated wire from tool. 16. Push terminal into connector body until fully seated. Pull on wire slightly to ensure terminal is locked in position. 17. Push terminal lock closed. 18. Install cover. –UN–10SEP03 19. Install connector to controller and close connector body locking cam. RXA0070481 A—CINCH Terminal Crimping Tool B—Terminal Receptacle C—Terminal D—Wire LD30992,0000246 –19–31MAR06–5/5 9015 20 ,131