TM2361 (24JUN08) 9020-05-1 450DLC Excavator Operation and Tests 062608 PN=625 Group 05 Theory of Operation Track Adjuster and Recoil Spring Operation VALVE GREASE 2 FITTING 1 FRONT GREASE IDLER RELIEF 3 PASSAGE 6 YOKE 5 4 CYLINDER –19–17MAY01 9 GREASE RECOIL 8 SPRING 7 PISTON T140036 10 TRACK ADJUSTER AND RECOIL SPRING T140036 1—Grease Fitting 4—Cylinder 7—Piston 10—Track Adjuster and Recoil 2—Valve 5—Yoke 8—Recoil Spring Spring 3—Grease Relief Passage 6—Front Idler 9—Grease The track adjuster and recoil spring (10) is supported front idle out, reducing track sag. The grease fitting (1) by the track frame. Shock loads on the track and front is protected from excess pressure by a check ball.
idler (6) are absorbed by the recoil spring (8). Increasing track sag is accomplished by loosening the To decrease track sag, grease (9) is pumped into the valve (2) to release grease from the cylinder through cylinder (4) through the grease fitting (1). The grease the grease relief passage (3). When releasing grease pushes the piston (7) against the yoke moving the from the cylinder, only loosen the valve (2). MR50960,00000FF –19–27APR06–1/1 9020 05 1