Diagnostic Information Tight Track Chain Diagnostic Procedure –1/1 Excessive Oil Leakage From Front Idler, Track Rollers, or Carrier Rollers Diagnostic Procedure –1/1 TM2361 (24JUN08) 9020-15-2 450DLC Excavator Operation and Tests 062608 PN=630 1 Sprocket Check Check sprocket for packed material and rocks. Is sprocket free of excess material? YES: Go to Track Sag Check. NO: Clean excess material from sprocket. – – –1/1 2 Track Sag Check Check track sag. See Check and Adjust Track Sag. (Operator’s Manual.) Is track sag within specification? YES: Diagnostic procedure complete. NO: Adjust track sag.
– – –1/1 Frequent Track Chain Sag Adjustment Required Diagnostic Procedure 9020 15 2 – – –1/1 1 Track Adjuster Check Check that grease fitting and valve are tight and not leaking grease or oil. Are grease fitting, valve and seal properly installed? YES: Diagnostic procedure complete. NO: Replace grease fitting or valve. To replace seals, see Track Adjuster Cylinder Disassemble and Assemble. (Group 0130.) – – –1/1