TM2361 (24JUN08) 9025-05-19 450DLC Excavator Operation and Tests 062608 PN=657 Theory of Operation A—From Pilot Control Valve— 16—Pilot Control Valve Side of 43—Orifice 47—Passage 2 Boom Up Pilot Signal Manifold 44—Spring B 48—Spring A 1—To Bottom Pilot Cap 17—Boom Down Shockless 45—Passage 3 49—Passage 1 15—Control Valve Side of Pilot Valve 46—Oil Chamber 50—Tapered Land Signal Manifold Boom Down Shockless Valve—The boom down Actuating boom down sends return oil from the pilot shockless valve regulates the return oil flow from the cap to port 1. From port 1 pilot oil flows through pilot cap during boom down operation.
Regulating the passage 1 (49) to spring A (48) cavity and through return oil flow controls the movement of boom 1 and passage 2 (47), through the orifice (43), and into the boom 2 spools to provide precise control of boom oil chamber (46). From the oil chamber return oil flows down function. through passage 3 (45) to spring B (44) cavity and past the tapered land to port A. Because of the Actuating boom up sends pilot oil to pilot signal pressure drop across the orifice, the return oil pressure manifold port A.
Pilot oil flows past the tapered land in the oil chamber and spring B cavity is less than the (50) on the boom down shockless valve (17) spool and return oil pressure in spring A cavity. The increasing into the oil chamber (46). The tapered land acts as a return oil pressure shifts the valve spool to the right, variable orifice between the spool and manifold as the causing the tapered land to restrict and then block the spool is shifted back and forth. Pilot oil flows from the flow of return oil from port 1 to port A. When the oil chamber, through the orifice (43), into passage 2 tapered land blocks the return oil flow, the pressure (47), and out port 1 to the control valve pilot cap.
Pilot increases in the oil chamber and spring B cavity. The oil also flows through passage 3 (45) into spring B (44) valve spool now shifts to the left, allowing return oil to cavity and passage 1 (49) into spring A (48) cavity. flow past the tapered land to port A. The opening and Because spring B is the larger spring, the increasing closing continues until the return oil is gradually pilot oil pressure shifts the valve spool to the left, returned through port A, controlling the movement of opening the passage from port A to port 1 and the boom 1 and boom 2 spools. allowing pilot oil to flow unrestricted to the pilot cap shifting the boom 1 and boom 2 valve spools.
MM61211,0001519 –19–16MAY08–4/10 9025 05 19 Arm 2 Flow Rate Pilot Valve (SK)—Arm 2 flow rate pilot valve is shifted by the pilot oil pressure (51) from arm in to –UN–19DEC01 port D and through the shuttle valves. The pilot valve routes pilot oil pressure from boom up (port A) (54) to the arm 2 flow rate valve in the control valve. The arm 2 flow rate valve restricts the flow of supply oil to the arm spool T149303 during arm in and boom up operation to ensure a flow of supply oil to the boom 1 spool.
Arm 2 Flow Rate Pilot Valve 51—Pilot Oil Pressure 52—To Hydraulic Oil Tank 53—To Arm 2 Flow Rate Valve 54—Pilot Oil Pressure from Boom Up 55—Spring Continued on next page MM61211,0001519 –19–16MAY08–5/10