TM2361 (24JUN08) 9025-05-43 450DLC Excavator Operation and Tests 062608 PN=681 Theory of Operation 27—Pilot Pump 36—To Fan Drive Motor 207—Outer Spring 215—Spring 28—Fan Drive Pump 200—Lever 208—Compensating Rod 216—Pin 30—Servo Piston 201—Pin 209—Pin 217—Solenoid Valve Spool 31—Feedback Link 202—Pin 210—Pin 218—Supply Oil 32—Load Sleeve 203—Pin 211—Large Chamber 219—Pilot Oil 33—Load Spool 204—Hole 212—Lever 220—Return Oil 34—Pilot Piston 205—Inner Spring 213—Pin Y14—Pump Control Solenoid 35—Compensating Piston 206—Small Chamber 214—Hole Valve Regulator Control by Pilot Control Pressure With the load spool in this position, the large chamber (Increasing Flow Rate)—When the fan drive pump (211) of the servo piston (30) is open to the tank.
With control solenoid valve (Y14) is actuated, pilot oil (219) supply oil constantly being routed to the small chamber as regulated by the solenoid valve, is routed to the (206) of the servo piston, the servo piston will now pilot piston (34). When the pilot oil pressure move to the left. When the servo piston moves to the decreases, the force of the spring (215) will move the left, the feedback link (31) will rotate clockwise around pilot piston to the left until the spring force equals the the pin (203), moving the load spool (33) to the right. force of the pilot oil pressure.
The movement of the pilot piston pushes the lever (212) to the left The servo piston will continue to move to the left until (clockwise) around the pin (213). the oil passages on the load spool and the load sleeve (32) are completely closed. With the servo piston in The pin (203), which is attached to the feedback link this position, the pump swash plate will move to (31), pulls the feedback link and the load spool (33) to maximum displacement in response to the decrease of the left, as the feedback link pivots counterclockwise pilot control pressure at the pilot piston (34). around the pin (210). Continued on next page OUT3035,000001D –19–27APR06–5/9 9025 05 43