John Deere 450DLC — Fan Drive Pump Regulator Operation

TM2361 (24JUN08) 9025-05-45 450DLC Excavator Operation and Tests 062608 PN=683 Theory of Operation 27—Pilot Pump 36—To Fan Drive Motor 207—Outer Spring 215—Spring 28—Fan Drive Pump 200—Lever 208—Compensating Rod 216—Pin 30—Servo Piston 201—Pin 209—Pin 217—Solenoid Valve Spool 31—Feedback Link 202—Pin 210—Pin 218—Supply Oil 32—Load Sleeve 203—Pin 211—Large Chamber 219—Pilot Oil 33—Load Spool 204—Hole 212—Lever Y14—Pump Control Solenoid 34—Pilot Piston 205—Inner Spring 213—Pin Valve 35—Compensating Piston 206—Small Chamber 214—Hole Regulator Control by Fan Drive Pump Delivery With the load spool in this position, supply oil (218) is Pressure (Decreasing Flow Rate)—The regulator routed to the large chamber (211) of the servo piston controls the fan drive pump in this manner if engine (30).

With supply oil being routed to both ends of the speed (fan drive pump speed) increases beyond the servo piston, the servo piston will move to the right, rated speed during startup. When fan drive pump due to the larger surface area of the large chamber delivery pressure increases beyond the force of the side. When the servo piston moves to the right, the inner spring (205) and the outer spring (207), the feedback link (31) will rotate counterclockwise around compensating piston (35) will move the compensating the pin (203), moving the load spool (33) to the left.

rod (208) to the right, in turn moving the lever (200) to the right (counterclockwise), around the pin (201), The servo piston will continue to move to the right until which is fixed to the housing. the oil passages on the load spool and the load sleeve (32) are completely closed. With the servo piston in The pin (203), which is attached to the feedback link this position, the pump swash plate will move to (31), pulls the feedback link and the load spool (33) to minimum displacement, decreasing the flow rate of the the right, as the feedback link pivots clockwise around pump. the pin (210). Continued on next page OUT3035,000001D –19–27APR06–7/9 9025 05 45