TM2361 (24JUN08) 9025-05-53 450DLC Excavator Operation and Tests 062608 PN=691 Theory of Operation 83—Right Control Valve 98—Boom Flow Rate Control 116—Power Passage Check 136—Auxiliary Flow Combiner (4-spool) Valve—Poppet Valve Valve (arm 1 out function Circuit Check Valve 84—Left Control Valve 100—Boom Down Circuit lift check) 138—Auxiliary Circuit Relief (5-spool) Relief and Anticavitation 117—Neutral Passage Check and Anticavitation Valve 85—Main Relief and Power Valve Valve (arm 1 in function 139—Auxiliary Circuit Relief Digging Valve 101—Boom Up Circuit Relief lift check) and Anticavitation Valve 86—Main Relief Valve Isolation and Anticavitation Valve 120—Arm Reduced Leakage 141—Neutral Passage Check Check Valve (4-spool) 102—Boom Reduced Leakage Valve—Check Valve Valve (left travel lift 87—Main Relief Valve Isolation Valve—Switch Valve 121—Arm Reduced Leakage check) Check Valve (5-spool) 103—Boom Reduced Leakage Valve—Switch Valve 142—Power Passage Check 88—Check Valve Valve—Check Valve 122—Arm In Circuit Relief and Valve (left travel lift 89—Travel Flow Combiner 104—Check Valve Anticavitation Valve check) Valve 105—Arm 2 Flow Rate Control 123—Arm Out Circuit Relief 145—Left Travel and Bucket 91—Bucket Regenerative Valve—Switch Valve and Anticavitation Valve Flow Combining Circuit Switch Valve 106—Arm 2 Flow Rate Control 124—Neutral Passage Check Check Valve 92—Bucket Flow Combiner Valve—Poppet Valve Valve (boom 2 lift check) 146—Bypass Shutoff (bucket Circuit Check Valve 110—Bypass Shutoff Valve 125—Power Passage Check flow combiner) Valve 93—Power Passage Check (right control valve, Valve (boom 2 lift check) (5-spool) Valve (bucket lift check) 4-spool) 128—Boom Mode Relief Valve 173—Boom 2 Regenerative 95—Bucket Dump Circuit 111—Arm Regenerative 129—Boom Mode Relief Valve Relief and Anticavitation Valve—Switch Valve Control Valve 174—Arm 1 Regenerative Valve 112—Neutral Passage Check 133—Check Valve (lift check) Valve 96—Bucket Curl Circuit Relief Valve (swing lift check) 134—Power Passage Check and Anticavitation Valve 115—Power Passage Check Valve (auxiliary lift 97—Boom Flow Rate Control Valve (arm 1 in function check) Valve—Switch Valve lift check) Main Control Valve—The main control valve consists Boom Mode Relief—The boom mode relief control of two rows of valves referred to as the left control valve (129) is provided in the boom lower circuit of valve (84) (5-spool) and right control valve (83) boom 2.
The boom mode relief valve decreases relief (4-spool). The major parts are main relief and power set pressure of the relief valve and reduces vibration of digging valve (85), flow combiner valves and spools, machine during boom lowering operation. which are operated by pilot oil pressure. The right control valve (4-spool) and left control valve (5-spool) For more information, see Hydraulic System are mounted back-to-back so the oil passages in the Schematic. (Group 9025-05.) valves are connected. The spools are selectively fitted. There is a spool in each valve to control the boom, All valves are accessible from the outside of control arm, and travel functions.
All other functions are valve by removing a plug, cover, or the pilot caps. See supplied by a single spool in one or the other of the Control Valve Line Identification. (Group 9025-15.) valves. Check valves are used as lift checks and to route supply oil between the right control valve Solenoid Valve Manifold—The solenoid valve (4-spool) and left control valve (5-spool) for combined manifold which contains the power dig, arm operation. The control valve is an open-center type regenerative, swing priority, and travel speed solenoid valve. Each valve section controls the flow rate and valves, is also located on the right control valve. direction for its hydraulic circuit.
Continued on next page MM61211,0001522 –19–15MAY08–7/15 9025 05 53