TM2361 (24JUN08) 9025-05-72 450DLC Excavator Operation and Tests 062608 PN=710 Theory of Operation Circuit Relief and Anticavitation Valve Operation 11 12 4 5 6 7 8 3 13 14 –UN–29JUN01 15 2 9 16 10 1 17 T143483 T143483 Circuit Relief Valve with Anticavitation 1—To Return 6—Check Valve Spring 11—Relief Operation 15—Reduced Pressure Oil 2—Piston 7—Pilot Poppet Spring 12—Anticavitation Operation 16—Return Oil 3—From Work Circuit 8—Screw 13—Relief Pressure Oil 17—Low Pressure Oil 4—Check Valve 9—Piston Spring 14—Operating Pressure Oil (cavitation) 9025 05 72 5—Pilot Poppet 10—Main Poppet At pressures below the circuit relief setting, the main During anticavitation operation (12), the check valve poppet (10) remains closed.
In relief operation (11), (4) retracts to allow oil to flow from the return passage the relief valve opens in three steps. In the first step, into the work circuit. During normal operation, the the pilot poppet (5) is opened. Flow restriction through operating pressure oil (14) on the inner shoulder holds the hollow piston (2) causes the pressure in the cavity the check valve against its seat. This pressure behind the main poppet to decrease. In the second decreases as pressure in the work circuit decreases. step of relief operation, the piston seats against the The return oil (16) on the outer shoulder moves the pilot poppet (5).
This further reduces oil flow into the check valve, main poppet, and piston against the cavity and greatly decreases the pressure against the springs to open the valve. back side of main poppet. The main poppet opens in the third step of relief operation. LD30992,000025D –19–01MAR06–1/1